Basic ANL Style Fuse Holder


Perfect if you’re on a budget!

This ANL Fuse Holder includes the fuse holder, clear cover, and a pair of Junction Stud / Starter Boots. Available with 4 AWG, 2-1 AWG, 1/0 AWG, and 2/0 AWG Boots.

Studs: 5/16” Nickel Plated Brass

Connect to cable via: 5/16” eyelets

Rated for up to 300 Amps



Dimensions are as follows:

Base – 4.97″ x 1.25″ / 126mm x 32mm
Base to Top of Studs – 1.32″ / 34mm
Base to Top of Boots– 1.5″ / 38mm
Hardware to Mount – #10


1 review for Basic ANL Style Fuse Holder

  1. 5 out of 5

    Bernard (verified owner)

    Used this with a 100AMP fuse to replace the power wire/fusible link on my 2005 Dodge Neon. I have not had any problems out of it since. It has been a few months. Dodge ran their power wire (looks like 8 or 10 gauge) from the starter, through the fusible link, around the engine block, down under the exhaust manifold, to the alternator. The battery got it’s power from the starter, essentially. Used this with CE’s 4 gauge power wire, and ran the wire along the firewall. Mounted this to the firewall, just above the cruise control box (if you don’t have this box, it’ll be easier). I was afraid of the fuse blowing from my 120AMP (potentially) alternator, but no problems yet.

Add a review

No more offers for this product!