Pre-Assembled Relay Panels with Relay Sockets
$350.00 – $425.00
This fully assembled relay panel is ready to be put to use to make your project a reality! All relays are in sockets to provide excellent serviceability. Available as shown with 6, 7, or 8 relays!
- 8-Position Blue Sea Systems Fuse Panel with Power Distribution
- Tyco/Bosch Relays in Relay Sockets
- 10 AWG Terminals in Sockets are crimped and soldered to minimize voltage drop
- Terminal Block – Inputs
- Terminal Block – Outputs
- All relays triggered positively
- Ground lead with hardware
6 Relay version pictured. Full specifications and panel dimensions are below for each of the three sizes!
- Description
- Reviews (0)
Description
Specifications
Each relay panel is capable of up to 100A of continuous current between all loads. Each includes a panel legend to simplify installation.
Power Input Stud:Â #10
Terminal Block for Inputs:Â #6 screw terminals
Terminal Bock for Outputs:Â #8 screw terminals
Spare Terminal(s) on Fuse Panel:Â #8 screw terminals
Relay Triggering:Â Positive
Relay Socket Terminals:Â OEM Grade, tin plated
Coil Wiring to Relays:Â 18 AWG
Switch Wiring from Relays to Output Block:Â 10 AWG
Wiring from Fuse Panel to Relays:Â 10 AWG
6-Relay Panel
- (3) Tyco/Bosch 30A SPDT Relays
- (3) Tyco/Bosch 50A SPDT Relays
Assembled on a 6″x10″ ABS Plastic Panel
7-Relay Panel
- (3) Tyco/Bosch 30A SPDT Relays
- (4) Tyco/Bosch 50A SPDT Relays
Assembled on a 6″x12″ ABS Plastic Panel
8-Relay Panel
- (3) Tyco/Bosch 30A SPDT Relays
- (5) Tyco/Bosch 50A SPDT Relays
Assembled on a 6″x14″ ABS Plastic Panel
Power Lead
Need a power lead to supply the relay panel? Use our Custom Cable Builders to build it to your specifications! For runs less than 6ft, we recommend a 6 AWG lead. For runs longer than 6ft, we recommend a 4 AWG lead. Either will require a #10 Eyelet on the end which connects to the Fuse Panel.
Use the Custom Cable Builder 2.0 to build a cable of 6 or 4 AWG with no fuse protection – ideal for short cables where the source of power is nearby
Use the Fusible Link Cable Builder to build a cable of 6 or 4 AWG with an inline fusible link to protect the run – ideal for cables which pass through the firewall into the engine bay to the source of power. The fusible link should always be on the power side in the engine bay for safety.
Reviews
There are no reviews yet.