200 Amp Continuous Duty Solenoid
$69.95
This 200 Amp Solenoid is designed for continuous duty use. It can switch high current accessories that require up to 200 Amps. It can also be used to isolate an auxiliary battery or as a battery disconnect.
Type: SPST
C to N.O.: 200 Amps continuous
Coil Voltage: 12 VDC
Coil Current: Approx 600 mA
Triggering: Positive or Negative
Stud Size: M8 (5/16″) & M5 (#10)
Additional Specifications, dimensions, and weight provided below.
- Description
- Reviews (0)
Description
Additional Specifications
Instantaneous maximum current: 600A </= 1s
Rated contact voltage: up to 110 Volts DC
Insulation resistance: >/= 100 MegOhm
Dielectric withstand voltage: 1500 VAC, 1 min, no breakdown
Contact voltage drop: </= 80mV @ 100A
Electrical life: >/= 500,000 cycles
Mechanical life: >/= 300,000 cycles
M8 terminal torque: </= 8.5 N-m
Ingress: IP65
Operating temperature: -25 degC to 55 degC
Dimensions
Weight: 24.6oz / 696g
Height: 3.68″ / 93mm
Width: 2.65″ / 68mm
Width of Mounting Bracket: 3.47″ / 88mm
Depth: 2.9″ / 74mm
Mounting: 2.50″ / 63.5mm on center
Mounting Hardware: 1/4″ or M6
Load studs are compatible with any of our 4 AWG, 2-1 AWG, 1/0 AWG, and 2/0 AWG Eyelets having a 5/16″ hole.
Coil studs are compatible with any of our Ring or Spade Terminals having a #10 hole.
Reviews
There are no reviews yet.