500 Amp Continuous Duty Solenoid
$99.95
This 500 Amp Solenoid is designed for continuous duty use. It can switch high current accessories that require up to 500 Amps. It can also be used to isolate an auxiliary battery or a battery disconnect.
Type: SPST
C to N.O.: 500 Amps continuous
Coil Voltage: 12 VDC
Coil Current: Approx 600 mA
Triggering: Â Positive or Negative
Stud Size: M8 (5/16″) & M5 (#10)
Additional specifications, dimensions and weight provided below.
- Description
- Reviews (0)
Description
Additional Specifications
Instantaneous maximum current:Â 2000A </= 1s
Rated contact voltage:Â </= 80 Volts
Insulation resistance:Â >/= 100 MegOhm
Dielectric withstand voltage: 1500 Volts, 1 min, no breakdown </= 100 Volts
Contact voltage drop: </= 80mV at 100A
Electrical life:Â >/= 200,000 cycles
Mechanical life: >/= 300,000 cycles
M8 terminal torque: </= 8.5 N-m
Ingress: IP50
Operating temperature: -25 degC to 55 degC
Dimensions
Weight:Â 26.4oz / 747g
Height: 3.68″ / 93mm
Width: 2.65″ / 68mm
Width of Mounting Bracket: 3.47″ / 88mm
Depth: 2.9″ / 74mm
Mounting: 2.50″ / 63.5mm on center
Mounting Hardware: 1/4″ or M6
Load studs are compatible with any of our 2-1 AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, or 4/0 AWG Eyelets having a 5/16″ hole.
Coil studs are compatible with any of our Ring or Spade Terminals having a #10 hole.
Reviews
There are no reviews yet.