EGIS 130 Amp Continuous Duty Relay

Description

Additional Specifications

Trigger Harness Specifics:  Amp Super Seal 1.5 Series 2-position Connector, 6ft 20 AWG Pink trigger, 18″ 20 AWG Black ground w/ #10 eyelet

Cable size required to achieve continuous rating:  4 AWG (25mm^2)
Instantaneous maximum current:  300A </= 3s
Intermittent Current @ 85degC: 240A
Continuous current ratings with 4 AWG cable:
– 180A @ 23degC
– 130A @ 85degC
– 70A @ 125degC
Contact Material:  AgSnO2
Coil Voltage:  12VDC
Coil current:  325mA @ 12VDC
Coil resistance:  37 Ohms +/- 10%
Coil power:  3.9W
Max coil temperature:  155degC
Minimum Operate Voltage:  7.2VDC
Release Voltage:  1.2VDC
Initial Voltage drop:  70mV @ 100A
Electrical life: 50,000 cycles @ 300A/13.5VDC, resistive
Mechanical life: > 1,000,000 cycles
M6 terminal torque: </= 5 N-m
Ingress: IP67
Operating temperature: -40 degC to 125 degC

Dimensions

[See drawing above in photos.]

Weight:  7.8oz / 220g
Height:  1.575″ / 50mm
Width (body):  2.48″ / 63mm
Width of Mounting Bracket:  3.937″ / 100mm
Depth:  2.795″ / 71mm
Mounting:  3.30″ / 84mm on center
Mounting Hardware:  1/4″ or M6

Load studs are compatible with any of our 8 AWG, 6 AWG, or 4 AWG MEGA Eyelets having a 1/4″ hole.  Of course, you can also order custom cables built to your exact specifications via our Custom Cable Builders!