2008-2010 Ford 6.4L Power Stroke Diesel Truck Battery Cable Kit

$499.95

Order by 3PM AZ time M-F and by 1PM AZ time on Saturday and your kit typically ships the very same day!

This is a complete replacement cable kit for the 2008-2008 Ford F250 and F350 Super Duty trucks with the 6.4L PowerStroke Diesel Engine(complete list below).

Stock Cable size is 1/0 AWG with a 2 AWG crossover cable if you can believe that!  Our Kit is all 2/0 AWG – 26% more copper than 1/0 AWG and double that of 2 AWG!  The kit includes an add-on 2/0 AWG frame to block cable for the driver’s side battery (see explanation below) and an 8 AWG battery to body ground cable added to driver’s side ground cable assy.  The increased cable size and improved grounding offers greatly improved cranking power and performance over stock cables, especially worn out ones.

Battery terminals include accessory studs where required to ensure a perfect factory fitment!

Full specifications listed below.

Description

The factory cable set leaves a lot to desire with thin wall terminals and lugs.  In addition, none of the terminations are well insulated from the elements which causes them to break down over time.  The driver’s side negative battery cable connects to the frame (not the block) and the crossover cable is inadequately sized at 2 AWG.  Combined, this reduces the effectiveness of the driver’s side battery when starting the engine.  Common problems with these vehicles are decreased starting performance, failed battery terminals, and grounding issues.  Our kit addresses all of these issues.

This Cable Kit is handcrafted to fit your Super Duty truck perfectly from the following Components:

  • Military Battery Terminals
  • 2/0 AWG  CE Auto Electric Supply tinned Oxygen Free Copper (OFC) Battery Cable – 5,929 Strands
  • 4 AWG CE Auto Electric Supply tinned Oxygen Free Copper (OFC) Battery Cable – 1,862 strands
  • 8 AWG CE Auto Electric Supply tinned Oxygen Free Copper (OFC) Battery Cable – 735 Strands
  • Super Thick Tin Plated MEGA Eyelets
  • Large gauge terminations dressed in our Super Thick Adhesive Lined MEGA Heat Shrink
  • Small gauge terminations dressed in our Adhesive Lined Heat Shrink Tubing
  • Adhesive Lined Heat Shrink used to dress loom to cables
  • High Temperature Wire Covering to protect starter and crossover cables

Includes a complete complement of hardware for a smooth installation.

Kit Includes the Following:
  • 2/0 AWG Crossover Cable Assy
  • 4ft Length of our 1,400 degF Hi-Temperature Wire Covering to protect the crossover cable assy
  • 2/0 AWG Starter Cable Assy with new solenoid trigger lead (requires re-use of the factory connector – outlined in the instructions)
  • 2/0 AWG Driver’s Battery Negative to Frame Ground Cable Assy – includes an 8 AWG body ground – an upgrade from factory
  • 2/0 AWG Frame to Block Ground Cable Assy – an upgrade from factory
  • Passenger Battery Negative to Block (2/0 AWG) / Frame (4 AWG) / Body (8 AWG) Ground Cable Assy
  • Grade 5 Hardware Kit for all grounds
  • Ties and mounting hardware
  • Complete step-by-step instructions
Fits the following Super Duty trucks:

2008 Ford F250 with 6.4L PowerStroke Diesel Engine
2008 Ford F350 with 6.4L PowerStroke Diesel Engine
2009 Ford F250 with 6.4L PowerStroke Diesel Engine
2009 Ford F350 with 6.4L PowerStroke Diesel Engine
2010 Ford F250 with 6.4L PowerStroke Diesel Engine
2010 Ford F350 with 6.4L PowerStroke Diesel Engine

Options

Reviews

  1. 5 out of 5

    Brett Barnot (verified owner)

    Absolutely a great product easy installation and much much higher quality than the factory wires


Add a review


No more offers for this product!