35A Single Fan Relay Kit – EFI Applications, Positive Trigger


This kit is for vehicles with Electronic Fuel Injection (EFI) with positive (+) fan triggering.  This completely waterproof kit installs easily and plugs directly into your electric fan via a standard fan plug – of which most of the major fan manufacturers use.  Harnesses dressed in Split Braided Tubing for that show car look!

Triggering is fully automatic (see specifications below for specifics).  Powers fans requiring up to 35A continuously with minimal voltage drop!

Includes full color step-by-step instructions and all hardware shown.

Full specifications outlined below.



Wiring to Battery: 10 AWG TXL, terminated with a 5/16″ eyelet
Wiring to Fan: 10 AWG TXL pair, terminated with an OEM style fan plug
Maximum Current Capability: 35A
Typical Voltage Drop through wiring when driving a single 16″ fan requiring 25A continuous with 13.8 VDC of input:

  • Immediately after power up: 350mV or 2.5%
  • After 1 hour of continuous operation: 390mV or 2.8%
  • After 4 hours of continuous operation:  400mV or 2.9%

Triggering is as follows:

  • Fully automatic via low or high current fan output from EFI ECU
  • Compatible with ECUs outputting a Positive (+) trigger for the fan circuits – includes OEM or OEM style harnesses with a built-in fan relay which is too small for the task at hand

Dimensions of Relay Module with mounting bracket installed: 2 15/32″ x 1 5/8″ x 3 17/32″ (62mm x 42mm x 90mm)

Harness Lengths:

  • Power Harness to Battery:  3ft
  • Output Harness to Fan:  3ft
  • Trigger Input from ECU:  2ft


There are no reviews yet.

Be the first to review “35A Single Fan Relay Kit – EFI Applications, Positive Trigger”

Your email address will not be published. Required fields are marked *