GEP Triple JCase Fuse Holder Kit
GEP Triple JCase Fuse Holder - Input Stud
GEP Triple JCase Fuse Holder - Output Connector
GEP Triple JCase Fuse Holder Kit with JCase Fuses
GEP Triple JCase Fuse Holder with Pre-wired Output Harness
GEP Triple JCase Fuse Holder Kit
GEP Triple JCase Fuse Holder - Input Stud
GEP Triple JCase Fuse Holder - Output Connector
GEP Triple JCase Fuse Holder Kit with JCase Fuses
GEP Triple JCase Fuse Holder with Pre-wired Output Harness

GEP Triple JCase Fuse Holder Kit – Panel Mount

Blue Sea Systems 6-pos ATC / ATO Fuse Panel with Independent Circuits and Cover 1 Blue Sea Systems 6-Position ATC / ATO Fuse Block / Fuse Panel with Independent Circuits
0 out of 5
( There are no reviews yet. )

$36.95 – $49.95

This GEP Triple JCase Fuse Holder Kit is slick!  This kit is compact, fully waterproof, and accepts up to (3) JCase Fuses (sold separately).  A single input stud powers all three fuse locations.  The output connector is via a Metri-Pack 630 Sealed Connector.  All hardware shown included.

We offer the kit two ways – completely disassembled or with a fully assembled 10 AWG output connector pigtail.  See below for details.

Full specifications and dimensions also provided below.  JCase fuses shown for illustrative purposes only, sold separately below.

SKU: N/A Categories: , , , Tags: , , , , ,
Add to wishlist

Description

Unassembled

This kit includes the following:

  • GEP Triple JCase Fuse Holder with Cover
  • 6mm Speed Clips, installed in mounting base (as shown)
  • 6mm plated mounting hardware
  • M6 plated flange nut (input stud)
  • Unassembled Metri-Pack 630 Series 3-position Sealed Female Connector with terminals, seals, and TPA

Assembled

This kit includes the following:

  • GEP Triple JCase Fuse Holder with Cover
  • 6mm Speed Clips, installed in mounting base (as shown)
  • 6mm plated mounting hardware
  • M6 plated flange nut (input stud)
  • Fully assembled Metri-Pack 630 Series 3-position Sealed Female Connector:
    • 3ft long 10 AWG RED TXL flying leads
    • Terminals are crimped and soldered for maximum current transfer

Specifications

Mounting Style:  Panel Mount (unit can be flush mounted)
Input Stud Size:  M6 (compatible with our 1/4″ MEGA Eyelets)
Maximum Input Stud Torque: 5 Nm
Output Connector Type:  Metri-Pack 630 Series with 6.3mm wide terminals
Fuse Style:  JCase (tall)

Overall Dimensions:  108mm x 42mm x 56mm deep (top of cover to rear of bottom connector exit)
Mounting Dimensions:  Speed clips are 86mm on center

Use our Custom Cable Builder 2.0 to build and order an 8, 6, or 4 AWG input cable to your specifications!

JCase Fuses & Input Stud Boots

Reviews

There are no reviews yet.

Be the first to review “GEP Triple JCase Fuse Holder Kit – Panel Mount”