8 AWG MEGA Eyelets


4.5mm ID cable entry  Please note the #10 is brazed and open ended.

We recommend our 3/8″ ID MEGA or Adhesive Lined Heat Shrink for these eyelets (1″ lengths if buying it pre-cut).

We recommend our 8-4 AWG Starter / Junction Stud Boots and our 8-4 AWG Alternator Boot for these eyelets.

We recommend our Hand Held Hex Crimping Tool for making industry spec crimps on our 8 AWG MEGA Eyelets.

All available below.