Pre-Cut Adhesive Lined Heat Shrink Tubing, 1/8″ to 3/8″ ID

$0.20$7.00

This is Cross-Link Polyolefin with a 3:1 shrink ratio. The adhesive melts with heat to completely insulate the termination and keep the elements out.

Sizing and length recommendations for all of the terminals we offer are below.  Offered in black only.

Clear

Description

We provide the following length guidelines:

  • 1” – Ideal for insulating our Non-Insulated Terminals and smaller MEGA Eyelets
  • 1.5” – Ideal for insulating splices, and for dressing the ends of split loom and split braided tubing to wires
  • 2” – Ideal for insulating our Step Down Butt Connectors, splices and to dress tubing to wires and wire harnesses
  • 3” – Ideal for insulating splices and to dress tubing to wires and wire harnesses

We provide the following ID guidelines:

  • 3/8” ID – Use to insulate our 6 AWG and 8 AWG MEGA eyelets, splices up to 10 AWG, 8 AWG to 12-10 AWG Step Down Butt Connectors, and to dress tubing to wires
  • 1/4″ ID – Use to insulate 12 AWG, 14 AWG, and 16 AWG splices, 12-10 AWG Non-Insulated Terminals, and 12-10 AWG to 16-14 AWG Step Down Butt Connectors
  • 3/16” ID – Use to insulate 18 AWG and 20 AWG splices, 22-18 AWG and 16-14 AWG Non-Insulated Terminals, and 16-14 AWG to 22-18 AWG Step Down Butt Connectors
  • 1/8” ID – Use to insulate 22 AWG and 24 AWG splices

Reviews

There are no reviews yet.

Be the first to review “Pre-Cut Adhesive Lined Heat Shrink Tubing, 1/8″ to 3/8″ ID”

Your email address will not be published. Required fields are marked *