Straight Crimp Battery Terminals

Description

Ferrule ID is as follows:

• 4 AWG – 7mm / .28”
• 2-1 AWG – 9.6mm / .38”
• 1/0 AWG – 11.6mm / .46”
• 2/0 AWG – 12.6mm / .50”
• 3/0 AWG – 13.8mm / .54”
• 4/0 AWG – 16.2mm / .64″

We recommend our 1″ ID MEGA Heat Shrink Tubing (in 2″ lengths if ordering it pre-cut) for 4/0 AWG terminals.

We recommend our 3/4″ ID MEGA Heat Shrink Tubing (in 1.5″ lengths if ordering it pre-cut) for 2-1 AWG, 1/0 AWG, 2/0 AWG, and 3/0 AWG terminals.

We recommend our 3/8″ ID MEGA Heat Shrink Tubing (in 1.5″ lengths if ordering it pre-cut) for 4 AWG terminals.

We recommend our Straight Crimp Battery Terminal Boots for these terminals.

We recommend either of our Hand Held Hex Crimp tools to make industry spec crimps for these terminals.

All available below.

Options

Crimping Tools